吹洗装置-吹洗装置-信东仪器仪表（苏州）股份有限公司

Your current location：Home>产品中心>吹洗装置

CMA系列

吹洗装置

Product classification

CMA系列

概述

CMA系列吹洗装置是由测量流量的金属管转子流量计、针阀和恒流量调节阀所组成。在恒流量调节阀的自动控制作用下，不管是管路中的入口(一次侧)压力变化还是出口(二次侧)变化，始终能够保持管路中的流体流量为恒定输出，其管路中的流体流量由金属管转子流量计就地指示直接读出。一般应用于要求管路中流体流量恒定输出的场合，与其它仪表配合使用可测量压力、液位、密度等工艺参数,广泛应用于石油、化工、冶金、电子、电力等工业领域。

RELATED PRODUCTS

Waist wheel flowmeter

The product is a high-precision and wide range volumetric gas flowmeter, which can directly measure the gas flow and realize the wireless remote transmission of the Internet of things. The product has a variety of structures and can meet different site requirements. This series of flowmeter is widely used in the measurement of urban pipeline gas, industrial gas, gas regulator station, energy management and other fields All kinds of non corrosive gas measurement and flow control and other occasions, product performance reached the domestic advanced level....

Turbine flowmeter

Stlw series intelligent gas turbine flowmeter is a kind of precision measuring instrument for gas flow measurement. This product is developed by our company with the introduction of advanced technology at home and abroad and our own products....

Metal tube rotameter

Metal tube rotameters are often used to measure the flow of liquid, gas and steam. For corrosive media, PTFE lining or other special materials can also be provided....

Ultrasonic flowmeter

The product is a new type of precision measuring instrument, with high reliability, accurate measurement accuracy, wide range, long service life and other characteristics....

RDC gas remote data acquisition and monitoring system

RDC gas remote data acquisition and monitoring system is a remote data acquisition and monitoring intelligent meter reading system developed by our company based on years of field instrument communication experience for gas measurement, which is matched with flowmeter and other field instruments....

IC card controller

The controller integrates IC card intelligent controller and control valve, and can be connected with gas flowmeter (including gas turbine, Precession Vortex, waist wheel, industrial mode meter, etc.)...

Purging device

CMA series purging device is composed of metal tube rotameter, needle valve and constant flow regulating valve. Under the automatic control of the constant flow control valve, the fluid flow in the pipeline can always be maintained as a constant output regardless of the pressure change at the inlet (primary side) or outlet (secondary side) of the pipeline...

V-Cone flowmeter

STV series cone flowmeter is a new type of differential pressure flowmeter, which is composed of V cone flow sensor, pressure guiding accessories and differential pressure transmitter. The V-cone flow sensor is composed of two V-shaped bodies which are coaxially installed in the measuring tube. The fluid gradually shrinks to the inner wall of the pipe along the upstream cone,...

Liquid level meter

FST-3000 series intelligent torque tube float liquid level (Interface) meter is a kind of instrument with intelligent data processing function....